MPL50-LI.png
MPL50-LI.png

Traction 50A Lithium Battery Charger

$1,250.00

Product code: MPL50-LI

The MPL50-LI Battery Charger from Traction Direct is a powerful battery charger designed to professionally charge most common battery types including LiFePO₄, Ca/Ca, Ca/Ag, AGM, GEL and standard lead-acid batteries. It features a dedicated reset mode for reactivating disabled/highly discharged LiFePO4 batteries and delivers a steady 13.4V support output up to 50A, making it perfect for diagnostics, maintenance and everyday workshop use.

Product code: MPL50-LI

The MPL50-LI Battery Charger from Traction Direct is a powerful battery charger designed to professionally charge most common battery types including LiFePO₄, Ca/Ca, Ca/Ag, AGM, GEL and standard lead-acid batteries. It features a dedicated reset mode for reactivating disabled/highly discharged LiFePO4 batteries and delivers a steady 13.4V support output up to 50A, making it perfect for diagnostics, maintenance and everyday workshop use.

  • The MPL50-LI is compatible with most common automotive battery types, including LiFePO₄ (lithium-iron phosphate), Calcium/Calcium (Ca/Ca), Calcium/Silver (Ca/Ag), AGM, GEL and conventional lead-acid batteries. It also includes a dedicated reset mode to reactivate disabled or deeply discharged LiFePO₄ batteries and works with the CDU-1 Charge Distribution Unit for expanded workshop use.

  • The MPL50-LI uses a programmed charging process suited to the selected battery type, delivering a controlled charge to restore and maintain performance. Its LiFePO₄ reset mode can bring protected batteries back into operation, while the 13.4V constant-output mode provides steady support power during diagnostics or extended workshop tasks.

  • LiFePO₄ contactor reset mode

    Short-circuit shutdown

    Reverse-polarity protection

    Fast constant-current bulk charge

    3-stage charging: CI–CV–Float

    Float/standby constant-voltage mode

    Adjustable to match battery specs

    Low-emission proportional timing

    Independent overrun timer

    Battery Support Mode up to 50A

    5m detachable output leads

    Zero-cross voltage sensing

    “Car Start” ready indicator (LiFePO₄ mode)

    Optional temperature-sensing leads

    Soft-start current control (temperature-controlled in LiFePO₄ mode)

  • INPUT: 110-230v

    WEIGHT: 13.2lb

    SIZE: 10.3”x11”x2.5”

    CARTON: 15.7”x15.7”x7.8”

    OUTPUT: 13.4v up to 50A continuous

  • Approved by JLR for use in showrooms.

  • Supplied with 16ft lead set and power cord.