All Products
Battery Chargers
MPL4 BATTERY CHARGER
Product code: MPL4
MPL4 Units will be available from May 2026. Pre-order now.
The MPL-4 Traction battery charger has been designed with the latest and future workshop standards in mind. Updates can be downloaded from our website and loaded using the supplied lead.
Suitable for most common battery types including LiFePO4, AGM, GEL and conventional lead acid.
The MPL-4 features a contactor reset mode for reactivating disabled/highly discharged LiFePO4 batteries.
This NEW model automatically adjusts current based on battery terminal temperature.
SPECIFICATION
INPUT: 110-230V AC
WEIGHT: 10lbs (4.5kg)
SIZE MPL4-BM (Desktop): 11 x 14.5 x 2.7 inches (280 x 369 x 70 mm)
SIZE MPL4-DT (Portable): 15 x 4.5 x 8.6 inches (380 x 115 x 220 mm)
SIZE MPL4-WM (Wall/Post Mount): 7.6 x 15 x 3 inches (193 x 380 x 77 mm)
MPL50-LI BATTERY CHARGER
Product code: MPL50-LI
The MPL50-LI Battery Charger from Traction Direct is a powerful battery charger designed to professionally charge most common battery types including LiFePO₄, Ca/Ca, Ca/Ag, AGM, GEL and standard lead-acid batteries.
It features a dedicated reset mode for reactivating disabled/highly discharged LiFePO4 batteries and delivers a steady 13.4V support output up to 50A, making it perfect for diagnostics, maintenance and everyday workshop use.
JLR recommend you purchase JLR-MPL4 for all new models.
MPL50 BATTERY CHARGER
Product code: MPL50B
The MPL50B Battery Charger by Traction Direct is a robust and professional-grade 12V battery charger designed for modern automotive workshops and service centres.
Built to meet the latest Jaguar Land Rover workshop standards, it delivers a powerful 50A charging output with advanced 3-stage charging and patented sulphation recovery technology that conditions batteries before charging to maximise performance and lifespan.
The JLR recommended Battery Charger Is the JLR-MPL4.
SPIC50 BATTERY CHARGER
Product code: SPIC-50
The SPIC-50 Battery Charger is a high-performance workshop charger that delivers a reliable 50A constant output and supports Lithium, Ca/Ca, Ca/Ag, AGM, GEL and conventional lead-acid battery types.
Designed with a customisable interface for battery BMS systems and programmable charge profiles, it features safe multi-stage CI-CV-Float charging, soft-start and protective shutdowns to ensure efficient, flexible charging for modern vehicle workshop needs.
The JLR recommended Battery Charger Is the JLR-MPL4.
Battery Support Units
ASU4 ADVANCED
SUPPORT UNIT
Product Code: ASU4
ASU4 provides an active stable voltage and up to 90 amps of fully regulated power to prevent loss of charge and damage to the battery.
ASU4 can be used with any 12V automotive battery including Lithium, AGM and GEL.
When the battery is charged the ASU is a regulated power supply to sustain accessory loads and offset parasitic drain.
Lead state temperature monitoring ensuring safe and stable output voltage conditions.
Designed for use in the workshop and compatible with our diagnostic trolleys.
This NEW model automatically adjusts current based on battery terminal temperature.
ASU4 SPECIFICATIONS
Input: 90–240VAC
Output: 14V up to 90A continuous
Weight: 18 lbs (8 Kg)
Size: 11.6 x 10 x 5 inches (295 x 255 x 130 mm)
Carton: 12.6 x 9.8 x 9 inches (320 x 250 x 230 mm)
BSU2-90C BATTERY
SUPPORT UNIT
Product Code: BSU2-90C
The BSU2-90/C Battery Support Unit is derived from the BSU2-125C (90A) Support Unit, but now with a contactor reset for lithium batteries. BSU2-90/C provides an active stable voltage and up to 90 amps of fully regulated power to prevent loss of charge and damage to the battery. BSU2-90/C can be used with any 12V automotive battery including Lithium, AGM and GEL.
When the battery is charged the BSU is a regulated power supply to sustain accessory loads and offset parasitic drain.
BSU2-90/C provides a constant voltage to prevent loss of data and possible damage to control units during software updates, and module reprogramming as well as diagnostic processes when in a Key On, Engine Off state.
The JLR recommended Battery Support Unit Is the JLR-ASU4 with the JLR-MPL4 as an alternative.
CSU2-50B COMBO
SUPPORT UNIT
Product code: CSU2-50B
The CSU2-50B Combo Unit is a versatile support solution that combines showroom battery conditioning and workshop battery support in one compact unit.
It delivers up to 50A of fully regulated 13.4V power to keep vehicles ready for demonstration and maintain battery health during diagnostics or software updates, ensuring stable accessory loads and preventing loss of charge or control unit damage.
The JLR recommended Combo Support Unit Is the JLR-ASU4 with the JLR-MPL4 as an alternative.
BSU2-50C BATTERY
SUPPORT UNIT
Product code: BSU2-50C
The BSU2-50C Battery Support Unit is a professional workshop support unit that delivers up to 50A of fully regulated power and constant 13.4V output to maintain stable voltage during diagnostics, software updates and reprogramming when the vehicle is in a Key On, Engine Off state.
Unlike standard support units, it can close the contactors on lithium batteries, making it ideal for vehicles with modern lithium 12V systems as well as AGM and GEL batteries, helping to prevent data loss or control unit shutdowns while you work.
The JLR recommended Battery Support Unit Is the JLR-ASU4 with the JLR-MPL4 as an alternative.
BSU2-50B BATTERY
SUPPORT UNIT
Product code: BSU2-50B
The BSU2-50B Battery Support Unit delivers up to 50A of fully regulated power to maintain stable voltage and protect your vehicle’s battery and control units during diagnostics, software updates, reprogramming and other workshop procedures even when the engine is off.
Designed for workshop environments, it supports AGM, GEL and Lithium batteries, helping prevent loss of charge, data corruption and damage to electronic systems. Built for easy mounting and reliable everyday use.
The JLR recommended Battery Support Unit Is the JLR-ASU4 with the JLR-MPL4 as alternative.
BSU2-125B (90A) BATTERY
SUPPORT UNIT
Product code: BSU2-125B (90A)
The BSU2-125B (90A) Battery Support Unit is a high-power workshop support unit that delivers up to 90A of fully regulated 13.4V output to maintain stable battery voltage during diagnostics, programming, module reprogramming and other Key On, Engine Off procedures, helping prevent data loss and control unit shutdowns.
It’s designed to support modern vehicles with AGM, GEL and LiFePO₄ batteries, making it ideal for demanding workshop environments.
JLR recommend you purchase JLR-ASU4 for all new models.
Showroom Support Units
ASU4 ADVANCED
SUPPORT UNIT
Product Code: ASU4
ASU4 provides an active stable voltage and up to 90 amps of fully regulated power to prevent loss of charge and damage to the battery.
ASU4 can be used with any 12V automotive battery including Lithium, AGM and GEL.
When the battery is charged the ASU is a regulated power supply to sustain accessory loads and offset parasitic drain.
Lead state temperature monitoring ensuring safe and stable output voltage conditions.
Designed for use in the workshop and compatible with our diagnostic trolleys.
This NEW model automatically adjusts current based on battery terminal temperature.
ASU4 SPECIFICATIONS
Input: 90–240VAC
Output: 14V up to 90A continuous
Weight: 18 lbs (8 Kg)
Size: 11.6 x 10 x 5 inches (295 x 255 x 130 mm)
Carton: 12.6 x 9.8 x 9 inches (320 x 250 x 230 mm)
CSU2-50B COMBO
SUPPORT UNIT
Product code: CSU2-50B
The CSU2-50B Combo Unit is a versatile support solution that combines showroom battery conditioning and workshop battery support in one compact unit.
It delivers up to 50A of fully regulated 13.4V power to keep vehicles ready for demonstration and maintain battery health during diagnostics or software updates, ensuring stable accessory loads and preventing loss of charge or control unit damage.
The JLR recommended Combo Support Unit Is the JLR-ASU4 with the JLR-MPL4 as an alternative.
SSU2-50B SHOWROOM
SUPPORT UNIT
Product code: SSU2-50B
The SSU2-50B Showroom Support Unit is a low-profile battery support unit designed specifically for car showrooms and display vehicles, providing up to 50A of fully regulated 13.4V power to instantly support the battery and keep vehicles ready for demonstration without the need for regular recharging.
Its intelligent current sensing ensures the unit only provides power when needed, maintaining battery condition and supporting accessory loads while offsetting parasitic drains.
The JLR recommended Showroom Support Unit Is the JLR-ASU4 with the JLR-MPL4 as alternative.
SSU2-50/S SILENT BATTERY
SUPPORT UNIT
Product code: SSU2-50/S
The SSU2-50/S Silent Showroom Support Unit is a low-profile battery conditioner designed specifically for car showrooms, delivering up to 50A of fully regulated 13.4V support power without fan noise so vehicles remain ready for demonstration while maintaining battery condition.
Its intelligent current sensing only engages support when needed, sustaining accessory loads and offsetting parasitic drain without the need for regular recharging.
The JLR recommended Showroom Support Unit Is the JLR-ASU4 with the JLR-MPL4 as an alternative option.
Rugged Laptops
Product code: S510AD
Featuring a brilliant 15.6" sunlight-readable display and a sleek, rugged design built for durability, the Getac S510AD, a rugged Copilot+ PC, delivers powerful AI-enhanced performance. Work with confidence, even in the most demanding environments.
The S510AD is a rugged Copilot+ PC built for the field, powered by an NPU with up to 50 TOPS for advanced AI tools. From real-time voice control, and multilingual communication, to workflow automation, the S510AD helps you to work faster, smarter, and more efficiently - today and in the years to come.
COMING SOON!
S510AD RUGGED LAPTOP
Workshop Trolleys
The Workshop Trolley is a slimline, easy-to-move workstation designed to organise and transport your battery chargers, support units, and diagnostic tools around the workshop/showroom. Built for practicality and durability, it includes a sturdy top plate for laptop, tablet or diagnostic use, four independent rear sockets and flexible mounting points. The trolley is available in three configurations: Basic, Diagnostics and EV, letting you choose the setup that best fits your workflow.
Basic - Includes rear cable hangar shown with optional gang socket (MPL50-LI not included)
Diagnostics - Includes rear cable hangar shown with optional gang socket, VESA arm and display, extended top surface and laptop/tablet storage shelf (MPL50-LI not included)
EV - Has an extended top shelf and rear cable hangar shown (MPL50-LI not included)
WORKSHOP TROLLEY
Leads
Replacement lead set for 50A battery chargers, including Traction’s MPL50B Battery Charger.
JLR BLADE LEAD SET
Compatible with Traction’s SSU2-50B Showroom Support Unit.
Also found in Showroom Support Unit Lead Set.
50A BATTERY SUPPORT UNIT LEAD SET
Product Code: BSU2-50B LEADS
Replacement lead set for 50A battery support units, including Traction’s BSU2-50B.
50A BATTERY SUPPORT UNIT CLIPS
Product code: BSU-CLIP (without wing nuts)
Product code: BSU-CLIP2 (without wing nuts)
Compatible with Traction’s SSU2-50B Showroom Support Unit.
Also found in Showroom Support Unit Lead Set and Showroom Support Unit Combi Clips.
90A BATTERY SUPPORT UNIT LEAD SET
Product Code: BSU2-125B (90A) LEADS
Replacement lead set for 90A battery support units, including Traction’s BSU2-125B (90A).
SHOWROOM SUPPORT UNIT CLIPS
Product Code: SSU2 COMBI CLIPS
Product Code: SSU2 COMBI CLIPS2
Combi clips 50A showroom support units, including Traction’s SSU2-50B Showroom Support Unit.
Now available with wing nuts on clamps for extra hold.
Contains:
5 x JLR Blades
5 x BSU Clips
BANK ADAPTOR LEAD SET
Product Code: CDU-LS
Replacement lead set for battery bank adaptors, including Traction’s CDU1.
Available as a single lead or pack of 4.
SHOWROOM SUPPORT UNIT LEAD SET
Product Code: SSU2-50-LS
Product Code: SSU2-50-LS2
Replacement lead set for 50A showroom support units, including Traction’s SSU2-50B.
Contains:
1 x Showroom Support Unit Extension Lead
1 x JLR Blade
1 x BSU Clip
JLR Blades and BSU Clips are also available in a 10 piece combi pack.
50A BATTERY CHARGER LEAD SET
Cables
The Lithium Software Update Programming Cable is a dedicated lead designed for use with lithium battery chargers, such as the MPL50-LI, allowing the unit to be connected to approved service tools for lithium-specific software updates.
Essential for maintaining correct charger functionality, this cable ensures your units stay up to date with the latest lithium charging profiles and safety parameters.
JLR Part Number: JLR-LI-PC01
Please refer to JLR Topix for software updates.
50A UNIT POWER CABLE
The 50A Unit Power Lead is a 2m C15 to 5-15P mains lead that provides reliable AC power to your battery chargers and support units, such as the BSU2-50, CSU2-50, SSU2-50, MPL-50 and CDU1.
Built to fit the standard input connection on all 50A units, it ensures a secure and consistent power supply for workshop and support use.
2m long
90A UNIT POWER CABLE
The 90A Unit Power Lead is a 2m C19-to-5-15P mains lead designed to provide reliable AC power to 90A units, specifically Traction’s BSU2-125B (90A).
Built to fit standard power input connectors, this replacement or spare lead ensures a secure and consistent mains connection in a workshop environment.
Dimensions: 78.7” (2m)
LITHIUM SOFTWARE UPDATE PROGRAMMING CABLE
Accessories
Replacement fuses for all chargers and support units. Choose your unit from the drop down for the correct fuse.
Pack of 10.
WING NUTS
Product code: 10 x WING NUT PACK
Product code: INDIVIDUAL WING NUTS
Wing nuts are designed to improve clamp grip on connectors, making it easier to secure lead sets during vehicle battery support or conditioning work.
They’re compatible with popular clip systems such as JLR Blade, Battery Support Unit Clips, Showroom Support Unit Lead Set and Showroom Support Unit Combi Clips, offering a simple and reliable way to keep your connections tight and secure.
Supplied in pairs.
10 x pairs, red & black - 20 parts total.
Designed to improve clamp grips.
INSULATOR SLEEVES
Insulator Sleeves are replacement or spare insulation covers for battery terminal clamps, providing a full insulation solution for existing partially insulated 50A, 90A and 12 A clamps used with battery chargers and support units.
Each pack includes 4 red and 4 black sleeves to help improve safety and prevent accidental contact on exposed connections.
Pack of 4 pairs, includes 4 red, 4 black.
5” L x 1” W x 1/2” H
REPLACEMENT OUTPUT CONNECTORS
Output connectors attach the output lead set to the unit, allowing power to be safely delivered from the charger/support unit to the battery.
Supplied with 2 metal terminal leads.