JLR Customers
This page is specifically for Jaguar Landrover dealers.
RELEASE NOTES
MPL4 BATTERY
CHARGER
Product code: MPL4
MPL4 Units will be available from May 2026. Pre-order now.
The MPL-4 Traction battery charger has been designed with the latest and future workshop standards in mind. Updates can be downloaded from our website and loaded using the supplied lead.
Suitable for most common battery types including LiFePO4, AGM, GEL and conventional lead acid.
The MPL-4 features a contactor reset mode for reactivating disabled/highly discharged LiFePO4 batteries.
This NEW model automatically adjusts current based on battery terminal temperature.
SPECIFICATION
INPUT: 110-230V AC
WEIGHT: 10lbs (4.5kg)
SIZE MPL4-BM (Desktop): 11 x 14.5 x 2.7 inches (280 x 369 x 70 mm)
SIZE MPL4-DT (Portable): 15 x 4.5 x 8.6 inches (380 x 115 x 220 mm)
SIZE MPL4-WM (Wall/Post Mount): 7.6 x 15 x 3 inches (193 x 380 x 77 mm)
ASU4 ADVANCED SUPPORT UNIT
Product Code: ASU4
ASU4 provides an active stable voltage and up to 90 amps of fully regulated power to prevent loss of charge and damage to the battery.
ASU4 can be used with any 12V automotive battery including Lithium, AGM and GEL.
When the battery is charged the ASU is a regulated power supply to sustain accessory loads and offset parasitic drain.
Lead state temperature monitoring ensuring safe and stable output voltage conditions.
Designed for use in the workshop and compatible with our diagnostic trolleys.
This NEW model automatically adjusts current based on battery terminal temperature.
ASU4 SPECIFICATIONS
Input: 90–240VAC
Output: 14V up to 90A continuous
Weight: 18 lbs (8 Kg)
Size: 11.6 x 10 x 5 inches (295 x 255 x 130 mm)
Carton: 12.6 x 9.8 x 9 inches (320 x 250 x 230 mm)
MPL50-Li BATTERY CHARGER
Product code: MPL50-LI
The MPL50-LI Battery Charger from Traction Direct is a powerful battery charger designed to professionally charge most common battery types including LiFePO₄, Ca/Ca, Ca/Ag, AGM, GEL and standard lead-acid batteries.
It features a dedicated reset mode for reactivating disabled/highly discharged LiFePO4 batteries and delivers a steady 13.4V support output up to 50A, making it perfect for diagnostics, maintenance and everyday workshop use.
JLR recommend you purchase JLR-MPL4 for all new models.
BSU2-50 BATTERY SUPPORT UNIT
Product code: BSU2-50B
The BSU2-50B Battery Support Unit delivers up to 50A of fully regulated power to maintain stable voltage and protect your vehicle’s battery and control units during diagnostics, software updates, reprogramming and other workshop procedures even when the engine is off.
Designed for workshop environments, it supports AGM, GEL and Lithium batteries, helping prevent loss of charge, data corruption and damage to electronic systems. Built for easy mounting and reliable everyday use.
The JLR recommended Battery Support Unit Is the JLR-ASU4 with the JLR-MPL4 as alternative.
MPL50 BATTERY CHARGER
Product code: MPL50B
The MPL50B Battery Charger by Traction Direct is a robust and professional-grade 12V battery charger designed for modern automotive workshops and service centres.
Built to meet the latest Jaguar Land Rover workshop standards, it delivers a powerful 50A charging output with advanced 3-stage charging and patented sulphation recovery technology that conditions batteries before charging to maximise performance and lifespan.
The JLR recommended Battery Charger Is the JLR-MPL4.
SSU2-50 BATTERY SUPPORT UNIT
Product code: SSU2-50B
The SSU2-50B Showroom Support Unit is a low-profile battery support unit designed specifically for car showrooms and display vehicles, providing up to 50A of fully regulated 13.4V power to instantly support the battery and keep vehicles ready for demonstration without the need for regular recharging.
Its intelligent current sensing ensures the unit only provides power when needed, maintaining battery condition and supporting accessory loads while offsetting parasitic drains.
The JLR recommended Showroom Support Unit Is the JLR-ASU4 with the JLR-MPL4 as alternative.
Product code: SPIC-50
The SPIC-50 Battery Charger is a high-performance workshop charger that delivers a reliable 50A constant output and supports Lithium, Ca/Ca, Ca/Ag, AGM, GEL and conventional lead-acid battery types.
Designed with a customisable interface for battery BMS systems and programmable charge profiles, it features safe multi-stage CI-CV-Float charging, soft-start and protective shutdowns to ensure efficient, flexible charging for modern vehicle workshop needs.
The JLR recommended Battery Charger Is the JLR-MPL4.
SPIC-50 BATTERY CHARGER
SSU2-50/S SILENT SUPPORT UNIT
Product code: SSU2-50/S
The SSU2-50/S Silent Showroom Support Unit is a low-profile battery conditioner designed specifically for car showrooms, delivering up to 50A of fully regulated 13.4V support power without fan noise so vehicles remain ready for demonstration while maintaining battery condition.
Its intelligent current sensing only engages support when needed, sustaining accessory loads and offsetting parasitic drain without the need for regular recharging.
The JLR recommended Showroom Support Unit Is the JLR-ASU4 with the JLR-MPL4 as an alternative option.
BSU2-90 BATTERY SUPPORT UNIT
Product code: BSU2-125B (90A)
The BSU2-125B (90A) Battery Support Unit is a high-power workshop support unit that delivers up to 90A of fully regulated 13.4V output to maintain stable battery voltage during diagnostics, programming, module reprogramming and other Key On, Engine Off procedures, helping prevent data loss and control unit shutdowns.
It’s designed to support modern vehicles with AGM, GEL and LiFePO₄ batteries, making it ideal for demanding workshop environments.
JLR recommend you purchase JLR-ASU4 for all new models.
CSU2-50 COMBO SUPPORT UNIT
Product code: CSU2-50B
The CSU2-50B Combo Unit is a versatile support solution that combines showroom battery conditioning and workshop battery support in one compact unit.
It delivers up to 50A of fully regulated 13.4V power to keep vehicles ready for demonstration and maintain battery health during diagnostics or software updates, ensuring stable accessory loads and preventing loss of charge or control unit damage.
The JLR recommended Combo Support Unit Is the JLR-ASU4 with the JLR-MPL4 as an alternative.